Home

Linksys Velop system Setup

When you have a larger home, it becomes difficult for a wireless router to cover the entire place. In such a situation, you need a new router. Or even better, you can get yourself a mesh system that includes multiple nodes. In such a case, you can bring home Linksys Velop whole-home Wi-Fi system that can cover up to 6,000 square feet. Linksys Velop is an ultimate replacement for your outdated extenders and routers. Just by completing the Linksys Velop setup, you will experience exceptional Wi-Fi coverage throughout the home. If you are wondering how to setup Linksys Velop whole home wifi system, the process is easy and can be completed through the Linksys Velop app.

Linksys mx10 Velop ax whole home wifi 6 system

The Linksys MX10 Velop AX whole home wifi 6 system is the next-gen of Wi-Fi that offers exceptional speed, coverage, and capacity. This device combines Velop’s intelligent mesh technology with Wi-Fi 6 to deliver 5.3 Gbps of speed in every corner of your place. Now, if you are wondering how many devices can connect to Velop then let us tell you Linksys MX10 Velop system can handle up to 50 devices. Linksys new Wi-Fi 6 mesh router system setup can be done with the Linksys Velop app.

Linksys MX5 Velop AX Whole setup via Linksys app

The Linksys Velop whole home wifi system was designed to be easy to use and setup and it certainly is. However, Linksys mx5 Velop setup can be a little frustrating and confusing for new users. But the Linksys Velop app can make the setup process easier and it also prepares the nodes via Bluetooth. Linksys Velop app is available for both the android and iOS devices.

A simple Wi-Fi mesh network in a few minutes

Linksys mx10 Velop setup takes only a few minutes. The simple, app-based setup will guide you with the entire process. The basic steps include -

Download the Linksys
app

Connect to the
modem

Assign the Wi-Fi name and create a password

Place the Linksys nodes throughout your home

Initial steps of Linksys MX5 Velop setup

You must have an active internet connection. Also, you must have a broadband modem provided by your internet service provider. The primary node is to be connected with the modem using an Ethernet cable. Now, you are required a mobile device to download the Linksys Velop app.

How to setup Linksys Velop whole home wifi system ?

Now, go through the detailed instructions for the Linksys mx10 Velop login and setup process. Make sure you follow the instructions step by step.
  • Download the Linksys app from the App Store or Play Store of your smartphone.
  • Connect the Linksys Velop node to the modem using Ethernet cable. You will see the solid blue light when the node is powered on and working.
  • You need to set up the primary node using the Linksys app.
  • Launch the Linksys app and tap on ‘Setup’
  • Select the Velop system from the option.
  • You need to agree to the terms and conditions.
  • Turn on the Bluetooth of your mobile device.
  • The app will start searching for the primary node in the network and will connect to it. Click ‘Next’

  • The app will detect your internet connection type.
  • Now, it will ask you to create a Linksys Velop account. Now, you need to create Linksys Velop WiFi 6 mesh router login details by entering the email address and password.
  • The app will ask you to change the Wi-Fi name and password. Enter the details and click the ‘Next’ option.
  • You can connect to the new wireless network by entering the password.
  • Now, you need to select the location of your primary node.
  • Your primary node is setup. If you want to add more nodes, you can tap on the “Add another node’ option.

Linksys Velop Setup

1

Linksys Velop setup- wired connection

Once the primary node is installed, you can add more nodes to the network. Connect the additional node to the primary node by using an Ethernet cable. Wired connection reduces the risk of wireless interference.

2

Linksys Velop setup- wireless connection

If you do not have a wired connection across your place, you can use wireless method to add additional nodes to the network. Make sure there no interference or long distance between the nodes. If the distance is more, the app will inform you that the device is not receiving a proper signal from the other node.

3

Linksys Velop setup with router

If you already have a router connected to your router and you want to add Linksys Velop system to the network to increase the signal strength or to increase the wifi area. You can add Linksys mx10 Velop ax whole home wifi 6 system with the wired or wireless router.

4

Linksys Velop setup with a wired router

If you have a wired router connected to the modem and do not have a wifi setup in such a case, you can add the primary node to the Ethernet port on a wired router. The node will get a signal from the router and it will create a wifi network. Now you can complete the Linksys mx5 Velop setup through the Linksys Velop app.

5

Linksys Velop setup with a wireless router

If you already have a wireless network set up with the existing router and the router is connected to the mode in that such, you can set up a primary node in a bridge mode.

 

Frequently Asked Questions

How many nodes can be added to Linksys Velop?

According to Linksys tech support, each velop can add up to 6 nodes. 

Do you need a computer for the Linksys Velop setup?

No, you don’t require a computer for the initial configuration of the Linksys Velop system. You can download the Linksys app on your Android and iOS device. 

How to connect nodes with one another?

You can connect nodes with one another by using a wired or wireless connection. For better speed and coverage, use a wired connection for connecting the nodes.

How to change the Velop admin password?

You can use the Linksys app or web interface to change the admin password of Linksys Velop admin password.

Linksys app- Access the Linksys mx10 Velop login through Linksys app. Go to ‘Admin’. Tap ‘Change Wi-Fi password and hint’ option. Enter a new password and hint.

Web interface- Go to the web interface. Go to router settings and click on the connectivity. Click the ‘Admin password’ option to change the password. 

How to update Linksys Velop firmware?

Follow the steps for Linksys Velop firmware update-

  1. Open the Linksys app.
  2. Tap ‘Menu’
  3. Tap the ‘Velop Administration’ setup.
  4. Enable the ‘Automatic firmware Update’ option.
  5. It will automatically update the firmware, whenever it is available.

 

If you need more info on Linksys mx10 Velop ax whole home wifi 6 system, you can contact our technical experts who are available round the clock to help you.